Forestry Machinery Standardization Technical Committee of China

 

International Standardization News

 

 

  Request for comments of ISO 5395-1:2013/DAmd 1 conducted by ISO/TC 23/SC 13...2017/01/13

  Request for comments of ISO/DIS 8437 serial draft international standards conducted by ISO/TC 23/SC 13...2016/06/20

  Notice of meeting and draft agenda for the ISO/TC 23/SC 13 and SC 17 meeting, to be held in Peterborough, United Kingdom from September 12th to 16th, 2016...2016/05/25

  Request for comments of ISO 5395-1:2013/DAmd 1 conducted by ISO/TC 23/SC 13...2016/05/15

  Request for comments of ISO 22868:2011  for periodic review conducted by ISO/TC 23/SC 17...2016/03/30

  Request for comments of ISO DIS 6531  conducted by ISO/TC 23/SC 17...2016/03/29

  Request for comments of ISO DIS 7112  conducted by ISO/TC 23/SC 17...2016/03/29

  Request for comments of ISO 5395-3:2013/DAM 2 conducted by ISO/TC 23/SC 13...2016/03/28

  Request for comments of ISO 5395-2:2013/DAM 2 conducted by ISO/TC 23/SC 13...2016/03/28

  Resolutions of the 29th meeting of ISO/TC 23/SC 15-Machinery for forestry, Savannah, GA, USA, 2016-02-16--18...2016/02/22

  ISO/TC23 /SC17 is now soliciting participants for international standards revision work  including ISO 9518 and ISO 13772...2016/01/06

  Request for comments of 3 new work item proposals(NWIP)of   ISO/TC 23/SC 15 concerning “Terms, definitions and classifications”...2015/12/15

  The Chinese delegation attended the 34th conference of ISO/TC23/SC17...2015/11/03

  ISO/TC23/SC15 Agenda of Savannah meeting Feb 2016...2015/10/21

  ISO/TC23/SC15 Secretariat's report_2015...2015/10/21

  Final resolutions taken at the ISO/TC 23/SC 13 meeting in Bloomington, Minnesota, USA, 6 October-8 October, 2015...2015/10/09

  ISO-TC23-SC17 Secretariat's report_2015...2015/10/09

  The notice of taking advice of ISO NP 5395-1/Amd 1 Garden Equipment–Safety requirements for combustion engine-powered lawnmowers– Part 1: Terminology and common tests – Amendment 1” by ISO/TC 23/SC 13...2015/09/15

  The notice of taking advice of ISO 5395-2:2013/DAmd 1 “Garden equipment--Safety requirements for combustion-engine-powered lawnmowers--Part 2:Pedestrian-controlled lawnmowers--Amendment 1:OPC, Cutting means acceptance criteria--Pressurized hoses of hydraulic systems by ISO/TC 23/SC 13...2015/09/15

  The notice of taking advice of ISO 5395-3:2013/DAmd 1 “Garden equipment -- Safety requirements for combustion-engine-powered lawnmowers -- Part 3:Ride-on lawnmowers with seated operator -- Amendment 1:OPC, Parking brake, ROPS, Pressurized hoses of hydraulic systems, Cutting means acceptance criteria, Clause A.2.7, Annex B Figure 4 by ISO/TC 23/SC 13...2015/09/15

  The notice of taking advice for periodic review of ISO 6534:2007 “Forestry machinery—Portable chain-saw hand-guards—Mechanical strength” by ISO/TC 23/SC 17...2015/09/15

  The notice of taking advice for periodic review of ISO 7914:2002 “Forestry machinery—Portable chain-saws—Minimum handle clearance and sizes” by ISO/TC 23/SC 17...2015/09/15

  The notice of taking advice for periodic review of ISO 8334:2007 “Forestry machinery—Portable  chainsaws—Determination of balance and maximum holding moment” by ISO/TC 23/SC 17...2015/09/15

  The notice of taking advice for periodic review of ISO 9476:1993 Forestry machinery—Portable chain-saws and brush-cutters — Exhaust system-caused fire risk by ISO/TC 23/SC 17...2015/09/15

  The notice of taking advice for periodic review of ISO 11148:1997 “Powered shredders and chippers —  Definitions, safety requirements and test procedures by ISO/TC 23/SC 13...2015/09/15

  ISO TC 23/SC 13 Secretariat Report...2015/09/11

  ISO TC 23/SC 13 2015 Draft agenda in Bloomington, USA...2015/09/11

  The notice of taking advice of ISO CD 5395-2:2013 Amd 2  “Garden equipment -- Safety requirements for combustion-engine-powered lawnmowers -- Part 2: Pedestrian-controlled lawnmowers -- Amendment 2: Cutting means enclosure guards by ISO/TC23/SC 13...2015/07/24

  The notice of taking advice of ISO CD 5395-3:2013 Amd 2 Garden equipment -- Safety requirements for combustion-engine-powered lawnmowers -- Part 3: Ride-on lawnmowers with seated operator -- Amendment 2:Cutting means enclosure guards by ISO/TC23/SC 13...2015/07/24

  The notice of taking advice for periodic review of ISO 7918:1995Forestry machinery -- Portable brush-cutters and grass-trimmers -- Cutting attachment guard dimensions” by ISO/TC 23/SC 17...2015/07/24

  The notice of taking advice for periodic review of ISO 11512:1995 Machinery for forestry—Tracked special machines—Performance criteria for brake systems by ISO/TC 23/SC 15...2015/07/24

  The notice of taking advice for periodic review of ISO 13861:2000 Machinery for forestry -- Wheeled skidders -- Terms, definitions and commercial specifications by ISO/TC 23/SC 15...2015/07/24

  The notice of taking advice for periodic review of ISO 13862:2000 Machinery for forestry -- Feller-bunchers -- Terms, definitions and commercial specifications by ISO/TC 23/SC 15...2015/07/24

  ISO-TC23-SC17 N1160 draft Agenda 2015 Porto Alegre...2015/07/13

  ISO-TC23-SC13 draft agenda 2015 USA...2015/07/07

  The notice of committee Internal ballot(CIB)for ISO CD 9518 Forestry machinery -- Portable chain-saws -- Kickback test” by ISO/TC 23/SC 17...2015/06/29

  The notice of taking advice of ISO 21628:2008/DAM 1:2015 draft standard “Gardening machinery— Powered material-collecting systems—Safety  AMENDMENT 1 by ISO/TC 23/SC 13...2015/06/29

  The notice of taking advice of ISO/TC 23/SC 17/ISO 11681-2:2011/DAM1  “Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2:Chain-saws for tree service”...2015/05/06

  The notice of taking advice for periodic review of ISO 8082-1:2009 “Self-propelled machinery for forestry--Laboratory tests and performance requirements for roll-over protective structures--Part 1: General machines” by ISO/TC23/SC 15...2015/03/18

  The notice of taking advice for periodic review of ISO 8082-2:2011 “Self-propelled machinery for forestry--Laboratory tests and performance requirements for roll-over protective structures--Part 2: Machines having a rotating platform with a cab and boom on the platform” by ISO/TC23/SC 15...2015/03/18

  The notice of taking advice for periodic review of ISO 17591:2002 “Machinery for forestry–Knuckle boom log loaders–Identification terminology, classification and component nomenclature” by ISO/TC23/SC 15...2015/03/18

  The notice of taking advice for periodic review of ISO 11839:2010 “Machinery for forestry—Glazing and panel materials used in operator enclosures for protection against thrown sawteeth—Test method and performance criteria” by ISO/TC23/SC 15...2015/01/23

  The notice of taking advice for periodic review of ISO 19472:2006 “Machinery for forestry--Winches--Dimensions, performance and safety” by ISO/TC23/SC 15...2015/01/23

  The notice of taking advice of ISO 8084:2003/FDAmd “Machinery for forestry -- Operator protective structures -- Laboratory tests and performance requirements” by ISO/TC23/SC 15...2015/01/08

  The notice of taking advice of ISO/TC23/SC17_ISO/TS 19858 "Forestry machines—Portable chain-saws—Test method for evaluating saw chain oil lubricity"...2014/12/29

  Meeting report of the ISO-TC 23-SC 17 Plenary 20-22 October 2014 Tsukuba Japan & Reference Translation...2014/11/28

  Resolutions approved at the joint ISO-TC 23-SC 13/CEN-TC 144-WG 7 meeting (19-21 November, 2014 in Delft, Netherlands...2014/11/25

  Revised draft agenda of the joint ISO-TC 23-SC 13/CEN-TC 144-WG 7 meeting (19-21 November, 2014 in Delft, Netherlands...2014/11/19

  Resolutions Approved at the ISO-TC 23-SC 17 Plenary 20-22 October 2014 Tsukuba Japan & Reference Translation...2014/10/29

  The Chinese delegation attended the 33rd Manually Portable Forestry Machinery branch conference (ISO/TC23/SC17) of the International Organization for Standardization...2014/10/28

  The work of periodic review voting for ISO 7113:1999, ISO 8380:1993, ISO 13772:2009 has been completed by the secretariat of forestry machinery standardization technical committee of China...2014/08/21

  The notice of taking advice of ISO/TC23/SC15_ISO/DIS 18564 “Machinery for forestry –Noise test code”...2014/07/30

  The notice of taking advice for periodic review of ISO 8083:2006 “Machinery for forestry -- Falling-object protective structures (FOPS) -- Laboratory tests and performance requirements” by ISO/TC23/SC 15...2014/07/30

  The work of voting for ISO/TC 23/SC 17 NWIP N 1117 has been completed by the secretariat of forestry machinery standardization technical committee of China...2014/07/28

  The notice of taking advice for periodic review of ISO 71131999 “Portable hand-held forestry machines Cutting attachments for brush cutters Single-piece metal blades” by ISO/TC23/SC 17...2014/07/25

  The notice of taking advice for periodic review of ISO 83801993 “Forestry machinery – Portable brush-cutters and grass-trimmers - Cutting attachment guard strength” by ISO/TC23/SC 17...2014/07/25

  The notice of taking advice for periodic review of  ISO 13772:2009 “Forestry machinery -- Portable chain-saws -- Non-manually actuated chain brake performance” by ISO/TC23/SC 17...2014/07/25

  The notice of asking for comments on ISO-TC23-SC17-N1117-NWIP Forestry machines – Portable chain-saws – Test method for evaluating saw chain oil lubricity ...2014/07/02

  Draft Agenda for the ISO-TC 23-SC 17 Plenary 20-22 October 2014 Tsukuba Japan & Reference Translation ...2014/06/09

  Secretariat’s report of ISO-TC 23-SC 172014-04& Reference Translation ...2014/06/05

  Resolutions Approved at the 22-23 May 2014 ISO-TC 23-SC 13 Plenary Meeting Milan, Italy& Reference Translation ...2014/05/29

  Revised Draft Agenda for the ISO-TC 23-SC13 Plenary 22-23 May 2014 Milan Italy & Reference Translation ...2014/05/21

  The Vote on Resolution to Approve NWIP for ISO 5395-2 and -3, Amendment on Cutting Means Enclosure Guards has been finished and the NWIP has been approved in ISO/TC 23/SC 13...2014/02/13

Resolutions from the 32nd meeting of ISO-TC 23-SC 17 in Tampere, Finland...2013/10/08 

Draft report and resolutions of ISO-TC 23-SC 15 Tampere meeting 2013...2013/10/08

Draft agenda of the 32nd meeting of ISO-TC 23-SC 17...2013/05/20

Invitation of the 32nd meeting of ISO-TC 23-SC 17...2013/05/20

Secretariat’s report of the 32nd meeting of ISO-TC 23-SC 17...2013/04/02

Announcement of meeting in Tampere Finland on 2013...2013/03/11

Report of the 27th meeting of CEN/TC 144 held on 26-27 November 2012 in Paris,  France...2012/12/20

15 Forestry machinery international standards have been published by ISO in 2011...2012/05/10

Resolutions from the 31st meeting of ISO/TC 23/SC 17 in Charlotte, NC, USA...2012/04/06

Resolutions approved at the 29 – 30 March 2012 ISO/TC 23/SC 13 plenary meeting in Charlotte, NC, USA...2012/04/06 

Draft agenda of the 31st meeting of ISO-TC 23-SC 17...2012/03/15

Draft agenda for the 29-30 March 2012 ISO/TC 23/SC 13 plenary meeting, in Charlotte, VA...2012/03/15

Technical corrigendum of standard ISO 11839...2011/11/23

Report of the secretariat of ISO/TC 23/SC 15 26th meeting...2011/07/04

Report from the 30th meeting of ISO/TC 23/SC 17 in Hamburg, Germany...2010/10/08

Resolutions of the 26th meeting of ISO/TC 23/SC 15 in Edinburgh, UK...2010/10/08

Report of the 26th meeting of ISO/TC 23/SC 15 in Edinburgh, UK...2010/10/08

Resolutions from the 30th meeting of ISO/TC 23/SC 17 in Hamburg, Germany...2010/09/17

Secretariat’s report of 2010 of ISO-TC 23-SC 17...2010/06/04

Report from the 29th meeting of ISO/TC 23/WG 17 in Beijing, China...2009/07/13

 

 

 

 
  Home Page